Agile camera setup
This topic outlines the setup steps in order to control the Agile ARC 360 camera using a Disguise mediaserver.
Requirements
-
Agile Camera that supports IP connectivity and SDI output.
-
Optional Agile HW Controller.
-
PoE switch (for supplying power to the camera).
-
Optional Disguise machine with a capture card (only if you want to use the camera as a live video input).
Warning: Currently the Agile Camera doesn’t support absolute PTZ (Pan, Tilt and Zoom) commands. Therefore, in order to send the camera absolute PTZ values, it’s necessary to create presets.
-
Create a UDP device from device manager.
-
Set the IP Address
-
Set the Port on the UDP device
-
Create an Agile Camera device from device manager.
-
Set the Address.
-
Set the Control Device to the UDP device.
-
Set the Camera Model.
-
Create a CameraControl layer on the timeline.
-
Set the Camera field to the camera that was created earlier.
-
Click the Command field to open up the keyframe editor.
-
Create and keyframe your desired commands for the camera.